Tired of juggling multiple remotes just to change the HDMI settings on your DIRECTV TV? Say goodbye to the remote chaos because we’ve got you covered! In this comprehensive guide, we’ll show you how to effortlessly navigate your DIRECTV remote to switch between HDMI1 and HDMI2 with ease. From understanding the remote’s capabilities to troubleshooting common issues, we’ve got all the tips and tricks you need to become a remote control maestro. So, grab your remote, kick back, and get ready to take control of your entertainment experience like never before!
Understanding the DIRECTV Remote’s Capabilities
DirectTV remotes are versatile tools not only for controlling your DIRECTV receiver but also for managing various functionalities of your TV. One of these functionalities includes changing TV inputs, such as switching from HDMI 1 to HDMI 2, a task that traditionally might require the TV’s original remote. This convenience is particularly useful for those who want to streamline their remote controls and reduce clutter in their living space.
Enabling HDMI Control with DIRECTV Equipment
HDMI Control is a feature that allows your DIRECTV equipment to communicate with your television via HDMI. It can be a godsend for simplifying your home theater system. Setting up HDMI Control means that with the press of a single button, you can turn on your TV, set the receiver to the correct input, and even turn on additional devices like your DVR. However, configuring this requires a bit of patience and programming prowess.
Initial Setup for HDMI Control
- Connect all HDMI-compatible devices to separate HDMI ports on your television.
- Ensure that the power is on for each HDMI-connected device.
- Verify that your DIRECTV remote has functional batteries and can power on the TV.
Switching TV Inputs Using DIRECTV Remote
The ability to switch TV inputs with your DIRECTV remote is not just convenient, it’s a feature that can transform your viewing experience. There are a couple of steps you can take to make this happen.
Using the Enter Button
A simple way to bring up the input menu is to press and hold the ENTER button on the bottom of the DIRECTV remote. If this doesn’t work, you may need to program your remote, which we will cover in the following sections.
Programming the DIRECTV Remote
To enable the flexibility of changing inputs, your DIRECTV remote needs to be programmed correctly. This allows it to communicate with your TV and gives you control over your TV’s input settings directly from your DIRECTV remote.
Activating the TV Input Button
- Slide the mode switch at the top of your remote to TV.
- Press and hold the MUTE and SELECT buttons simultaneously until the green light at the top of the remote flashes twice.
- Using the keypad, enter the code 960. A double flash of the green light indicates that the Input button is enabled.
- Slide the mode switch back to the DIRECTV logo to regain control over your DIRECTV receiver.
If during this process the LED flashes four times after entering 960, the Input button has been turned off, and you’ll need to repeat the steps to enable it again.
Direct TV Remote – Changing Between HDMI1 and HDMI2
Once you have programmed your DIRECTV remote and enabled the Input button, changing between HDMI inputs is straightforward. Here’s how you can easily toggle between HDMI 1 and HDMI 2:
Step-by-Step Guide to Switch HDMI Inputs
- Ensure your TV and all HDMI-connected devices are powered on.
- Press the INPUT button on your DIRECTV remote. This should bring up the input selection screen on your TV.
- Navigate through the available inputs using the arrow keys on the remote until you reach the desired HDMI input.
- Select the input by pressing the ENTER button.
This process may vary slightly depending on your TV’s make and model, but the basic principle remains the same across most modern televisions.
Utilizing Advanced Features of DIRECTV STREAM Remote
For users of the DIRECTV STREAM service, there are additional benefits. The DIRECTV STREAM DEVICE & REMOTE CONTROL offer a multitude of features, including voice control, which can further simplify the input-switching process. Although it’s not compatible with DIRECTV set-top boxes or Genie® Servers, it does provide a modernized approach to controlling your TV and connected devices.
The Convenience of Voice Control
With voice control, you can command your TV to switch inputs without manually navigating through menus. This feature is increasingly common in remote controls and can enhance the user experience significantly, especially for those who prefer hands-free operation.
Troubleshooting Common Issues
Despite the straightforward nature of these steps, sometimes you might encounter issues when attempting to change HDMI settings on your TV using the DIRECTV remote. Here are some tips for troubleshooting common problems:
Remote Doesn’t Respond
- Check the batteries in the remote and replace them if necessary.
- Make sure the remote is in TV mode before attempting to change inputs.
- Clear any obstructions between the remote and the TV.
TV Doesn’t Switch Inputs
- Ensure that the TV Input button has been activated using the 960 code.
- Confirm that your TV is compatible with HDMI Control and that it’s enabled.
- Refer to your TV’s manual for any specific settings related to external control or HDMI-CEC.
Conclusion
Changing HDMI settings on your TV using a DIRECTV remote is not only possible, but it can also simplify your media experience. By following the above steps and tips, you can enjoy seamless control over your home theater setup with a single remote. For more detailed instructions and assistance, you can consult the DIRECTV Community Forums here, or watch helpful tutorials on YouTube here. With a little patience and the right know-how, your DIRECTV remote can become the only remote you need.
How do I change TV input from HDMI 1 to HDMI 2 using the DIRECTV remote RC34?
Answer: To change the TV input from HDMI 1 to HDMI 2 using the DIRECTV remote RC34, press and hold the ENTER button to bring up the input menu for your TV. If this doesn’t work, you can also program your DIRECTV remote following the tutorial provided.
How can I switch TV inputs using the DIRECTV remote?
Answer: To switch TV inputs using the DIRECTV remote, you can press and hold the MUTE and SELECT buttons at the same time until the green light at the top of your remote flashes twice. Then enter 960 using the keypad on the remote control.
How do I activate the TV INPUT button on my DIRECTV remote?
Answer: To activate the TV INPUT button on your DIRECTV remote, slide the mode switch to TV, press and hold Mute and Select until the LED blinks twice, and then enter 960. If the LED flashes twice after entering 960, the Input button is enabled.
How do I use the Input button on my DirecTV Genie remote to switch the TV input?
Answer: To use the Input button on your DirecTV Genie remote to switch the TV input, simply press the Input button to switch the TV input to the desired HDMI port.
How can I switch from HDMI 1 to HDMI 2 on the remote?
Answer: To switch from HDMI 1 to HDMI 2 on the remote, connect all HDMI-compatible devices to separate HDMI ports on your television and ensure that the batteries in your remote control are functioning. Then, use the Input button on your remote to switch between the HDMI ports.